PROFLEX® PWA 185 is a high solids, cross linking, Amide-Ester-Acrylate, resin-based adhesive formulated for the interior installation of dry-back parquet, engineered wood plank, acrylic impregnated plank, and pre-finished and unfinished solid wood flooring. It is solvent free, has a low VOC content, contains no hazardous chemicals as per OSHA Regulation CFR 1910.1200. PWA 185 is also a nonflammable, low odor adhesive that meets all federal, state, and local governmental indoor air quality regulations. This specially formulated adhesive has good early strength buildup for immediate grab and gradually builds into a tenacious but resilient bond as the chemicals in the adhesive cross-link.
Advantages
Coverages, Recommended Trowel Sizes
Thin gauged solid wood and exotic species 7/16” (11 mm) thick or less. – 3/16” x 1/4” x 1/2” flat V – Up to 80 sq. ft./galPre-finished / un-finished solid wood and exotic species 15/32” – 3/4” (12mm-19mm)thick and engineered plank & acrylic impregnated plank – all thickness. – 3/16” x 1/4” x 5/16” flat V – Up to 60 sq. ft./gal
Dry-back parquet – 1/8” x 1/8” x 1/8” square – Up to 80 sq. ft./gal
Cork tile, cork sheet, and cork underlayment.Install cork flooring into wet adhesive. Curled cork tile or cork sheet may require 5-10 minutes advance cure time. – 1/16” x 1/16” x 1/16” square
Association Grade Underlayment Plywood, Association Grade Particleboard Underlayment, Cork Underlayments, Existing Well-Bonded Vinyl Tile, Sheet Flooring, Terrazzo, Radiant Heated Subfloors
4 Gallon pail; 48 pails per pallet