Impregnating Sealer

PROFLEX® Impregnating Sealer is a special formulated sealer designed to form a moisture and stain resistant barrier that is ideal for interior and exterior applications. Use it on grout, ceramic, porcelain, quarry tile, marble, granite, travertine, concrete, slate, brick and masonry surfaces.

Advantages

• Resist stains
• Oil and water resistant
• Penetrates dense, porous surfaces
• U.V. Transparent
• Low VOC

Features and Benefits

• Superior Protection from Oil and Water based stains
• Penetrates most tile and stone surfaces
• Leaves a natural looking finish
• Will not gloss or enhance surface
• For interior and exterior use
• Controls Efflorescence

Application

Preparation: Clean area with PROFLEX TILE & GROUT CLEANER and dry area prior to application. Due to variations between surfaces, PROFLEX recommends doing sample applications prior to full installation. Some shading of surface may occur. It is the responsibility of the user to determine the suitability of the product for its intended use.

Application: DO NOT DILUTE OR THIN PRODUCT FOR ANY REASON. Apply PROFLEX POROUS SEALER evenly to sur-face using a clean towel, paint roller or brush. Allow 3-5 minutes for product to work into surface. Wipe up excess prod-uct with a clean towel. Process should be repeated 2 hours after first application, and for best results, a third application is recommended. Allow 24-72 hours after final application to fully cure. If excess amount has dried and formed a residue, it may be removed by re-applying product and immediately wiping off while surface is wet.

Available docs (click to download)

Impregnating Sealer Data Sheet

Impregnating Sealer Materials Safety Data Sheet